Flatness accuracy As per IS: 2285-2003
Flatness accuracy As per IS: 2285-2003
Stress relived after rough Machining Hardness between 170 to 220 BHN
MS Fabricated stand with levelling provision
MS cupboard type stand with levelling provision
T-slot, grind slot and taped holes are provided as required
Rexene cover
Special sizes are available as per Requirement
| SI NO | CAT NO | Surface Plate dimension (mm) | Grade I Accuracy As Per IS:2285-2003 |
| 1 | AMT-101 | 400x400 | 10 |
| 2 | AMT-102 | 600x450 | 10 |
| 3 | AMT-103 | 630x630 | 10 |
| 4 | AMT-104 | 900x600 | 12 |
| 5 | AMT-105 | 1000x630 | 12 |
| 6 | AMT-106 | 1000x1000 | 14 |
| 7 | AMT-107 | 1200x900 | 14 |
| 8 | AMT-108 | 1600x1000 | 16 |
| 9 | AMT-109 | 1200x1000 | 16 |
| 10 | AMT-110 | 1200x1200 | 16 |
| 11 | AMT-111 | 2000X1000 | 20 |
| 12 | AMT-112 | 2000X1500 | 20 |
| 13 | AMT-113 | 2500X1000 | 22 |
| 14 | AMT-114 | 3000X2000 | 28 |
